
Prescott Valley Concrete Company serves Jerome, AZ as your local concrete contractor, with concrete steps, foundations, flatwork, and retaining walls on steep hillside properties and historic homes built before 1930 - with a crew that understands the mining-affected ground, National Historic Landmark considerations, and 5,000-foot elevation conditions that make concrete work here unlike any other town in Arizona. We respond to estimate requests within 1 business day.

Navigating Jerome means climbing - the town is built on a steep hillside where nearly every property has grade changes between the street and the front door, and between different levels of the yard. Concrete steps are one of the most common and most necessary improvements on Jerome properties, and our concrete steps construction work is designed for the slope conditions, soil instability, and historic setting that define this town.
Jerome's homes sit on ground that was blasted and mined for over 80 years, leaving unstable fill, old tunnel voids, and displaced soil beneath many properties. Any foundation work in Jerome requires someone familiar with how that history affects the ground under a specific address - a standard Phoenix-area foundation spec is not appropriate here.
On Jerome's steep lots, retaining walls are often the only way to create a usable yard area and prevent soil from sliding downhill during monsoon rains. Concrete retaining walls handle the soil pressure and water saturation that stone or brick alternatives struggle with on a hillside this steep, especially after the hard rains of July and August.
Many Jerome properties have no traditional driveway - the streets are narrow, the lots are small, and vehicle access is often limited. Where driveways or parking areas are feasible, they require careful design to handle the slope and the freeze-thaw cycles at 5,000 feet that can crack poorly designed flatwork within a few winters.
Walkways and paths between structures on Jerome's hillside properties often serve as the primary access between the street, front entry, and yard. Properly pitched and jointed concrete paths handle Jerome's wet winters and heavy monsoon rains without the heaving and cracking that gravel or decomposed granite paths develop after a few seasons.
New construction and additions in Jerome are rare, but when they happen the foundation design must account for the hillside grade, the possible presence of fill from mining-era construction activity, and the freeze-thaw exposure that applies at this elevation. Getting the slab specification right from the start prevents costly movement and cracking in the years that follow.
Jerome sits at approximately 5,000 feet elevation on the side of Cleopatra Hill, and that combination of altitude and steep terrain creates a set of concrete challenges you will not find anywhere else in Arizona. The freeze-thaw cycle at this elevation is real - temperatures drop below freezing regularly from November through March, and the daily swing between cold nights and warm days stresses concrete and masonry with repeated expansion and contraction. On a hillside, monsoon runoff moves fast, carrying the water toward foundations, walkways, and retaining walls before any drainage system can redirect it. A contractor who has only worked in flat, lower-elevation Arizona will underestimate how quickly these forces do damage here.
Then there is the ground itself. Jerome was one of the richest copper mines in the United States for decades, and mining activity left a network of tunnels and unstable fill beneath much of the town. Some of Jerome's historic structures have literally shifted positions over the years due to subsidence - the famous sliding jail moved roughly 225 feet from its original location. Any concrete or foundation work must account for the specific ground conditions under a given property, not a generic soil assumption. On top of that, the entire town is a National Historic Landmark District, which means exterior modifications to properties in the historic core may require town review before work can proceed. Knowing how to navigate that process is part of doing business in Jerome.
Our crew works throughout Jerome regularly, and we understand the concrete and foundation conditions that are specific to this town. Jerome's streets are some of the narrowest in the region - some properties can only be reached on foot or with smaller vehicles, and getting concrete and equipment to a job site here often requires planning that would be unnecessary in any other Arizona community. We build that logistics work into every Jerome project estimate rather than adding it on as a surprise charge after the job starts.
Jerome State Historic Park, built around the old Douglas Mansion on the lower part of the hill, and the Jerome Grand Hotel - the former hospital visible for miles from the Verde Valley floor - are two of the town's most recognizable landmarks. Most residential concrete work happens on the quieter streets running between and above these buildings, where homes from the 1890s through the 1920s sit close together on small lots that were never designed with modern contractor access in mind. The Jerome State Historic Park is managed by Arizona State Parks and is a useful reference for understanding the town's history and the kind of construction that was typical during the era when most Jerome homes were built.
We also serve the surrounding Verde Valley communities on a regular basis. The neighboring town of Camp Verde is about 20 miles to the southeast, and Clarkdale sits just a few miles downhill from Jerome at the base of Cleopatra Hill - both areas we cover regularly with the same attention to local terrain and soil conditions that we bring to every Jerome job.
We respond to all Jerome requests within 1 business day. Because of the unique terrain and site-access challenges on Jerome properties, every project requires an in-person site visit before we can provide an accurate quote - phone estimates are not possible for Jerome jobs.
We visit the property, evaluate the existing ground conditions, assess site access for equipment and materials, and review any permit or historic district considerations that apply. The written estimate reflects the actual complexity of the job, with no hidden access charges added later.
We handle permit applications with the Town of Jerome Building Department on your behalf. For properties in the historic core, we confirm any additional review requirements before scheduling so the project timeline accounts for all approvals.
Work proceeds on the agreed schedule using equipment and crew appropriate for Jerome's narrow streets and steep access. We protect fresh concrete from temperature swings and monsoon weather, and we clean up fully before we leave - including removing all form materials and excess spoil from the site.
We serve Jerome, AZ and the surrounding Verde Valley. Contact us today and we will respond within 1 business day with next steps.
(928) 458-7263Jerome is a small incorporated town in Yavapai County with a population of around 450 people, perched on the steep side of Cleopatra Hill in the Black Hills of central Arizona at roughly 5,000 feet elevation. The town was founded in the 1870s as a copper mining settlement and grew into one of the most productive mining towns in the American Southwest, with a peak population in the thousands during the early 20th century. After the mines closed in 1953, Jerome nearly emptied out, but a revival beginning in the 1960s brought artists, residents, and visitors back to the historic hillside streets. Today, Jerome draws hundreds of thousands of tourists each year and is designated a National Historic Landmark by the federal government, with most of its buildings dating from the mining boom era between 1890 and 1930.
Jerome's housing stock is among the oldest in Arizona, with wood-frame, brick, and stone construction from the mining era making up the majority of residential buildings. Lots are small, streets are narrow and steep, and many properties sit on terrain that was graded or filled during the mining years. The town has a mix of primary residences, vacation rentals, bed-and-breakfasts, and commercial uses in historic buildings - all packed into a compact hillside footprint that makes contractor access more challenging than in any nearby Arizona community. The nearby community of Clarkdale is just a few miles downhill, and the Verde Valley communities of Cottonwood and Sedona are accessible in under 30 minutes from Jerome.
Durable driveways built to handle Arizona weather and daily use.
Learn MoreProfessional floor installation for residential and commercial spaces.
Learn MoreJerome properties need a contractor who understands the hillside terrain, historic district requirements, and high-elevation conditions - call us today or request a free estimate online.